INSTRUCTIONS FOR PREPARATION AND SUBMISSION 
OF PRINT-READY PAPERS (see last page for more than 2 authors)

Graduate of Trinity College Dublin, 1992. Completed a masters degree in 1994 on the development of Bridge WIM systems. Currently director of information research at IMOXIN Data Plc..			Obtained B.E. and M.Sc. from University College Galway, Ireland and Ph.D. from University of Michigan. Joined WIM data group in World Data Systems in 1994 where he is an Engineering Systems Controller.	
John W. SMITH
University of Cork
Ireland	Pierre BLANC
National Cyrilic Authority of Wales
United Kingdom	

Abstract
This paper gives instructions for the preparation of papers to be presented at the 6th International Conference on Weigh-In-Motion (ICWIM6). It is presented, as far as is possible, in a style consistent with a conference paper. Abstracts for these papers should not exceed 10 lines in length. The abstract should be provided in English and French. Nothing except the author details, photographs and abstracts should be present on the first page.
The papers will be first published in the conference proceedings, later on the ISWIM website, and the best ones may be submitted to a Journal with the authors’ agreement.
Keywords:  Language, Font, Photograph, Heavy Vehicles, Freight transport, Weigh-in-Motion, WIM.

Résumé
Ce papier donne les instructions pour la préparation des articles qui seront présentés à la 6e conférence internationale sur le pesage en marche (ICWIM6). Ces instructions sont aussi proches que possible de celles de la plupart des articles de conférences. Les résumés de ces articles ne doivent pas dépasser 10 lignes. Le résumé doit être produit en anglais et français. Rien d’autre que les informations concernant les auteurs, leurs photos et le résumé ne doit figurer sur la première page.
Les articles seront d’abord publiés dans les actes de la conférence, puis sur le site ISWIM. Les meilleurs pourront être soumis à une revue avec l’accord des auteurs.
Mots-clés: Langue, police, photos, poids lourds, transport de marchandises, pesage en marche, WIM.

1.	
Paper Parts
Each paper should have the following parts:
•	title
•	author(s) information, including photo(s)
•	abstract in English and French (the French abstract will be revised by an ISC member)
•	body of the paper, including any tables and/or figures
•	list of references.
2.	General Instructions
Provide papers in electronic form (.RTF or .DOC file required) with any images placed within the text. The papers will be published, with no editing other than the author’s, in a conference proceedings. Papers not prepared to the correct presentation standard may be rejected regardless of their technical content. The editor reserves the right to make minor editorial changes without consultation with the authors.
2.1	Length
The session paper (including title/abstract and reference list pages) must not exceed 8 pages. Short papers of 6 pages maximum are also welcome, for on-going research or specific topics.
2.2	Language 
All papers must be submitted for assessment in English. Authors from French speaking countries and those who may get translations are encouraged to also submit their papers in French. Such papers will be reviewed and published on the ISWIM web site, and the best ones will be submitted to a French journal with the authors’ agreement.
2.3	Document Style
Authors are encouraged to use this file of instructions as a template document. The template contains all the style elements needed.
Margins
Top, bottom, left, and right margins of 2.5 cm should be used on A4 size pages (210 x 297 mm).
Page Numbers
No page numbers should be provided. The footer should be 1.2 cm from the bottom of the page. Typeface and size are the same as for the body text.
Typeface 
All papers should be in 12-point Times New Roman. Text should be single-spaced and justified on both sides. The authors’ biographies should be in 9-point Times New Roman.
Headings
First-level sections (excluding the abstract and reference list) should be numbered 1., 2., 3., etc.  Second-level sections should be numbered 1.1, 1.2, 1.3, etc., 2.1, 2.2, 2.3, etc. Third-level sections (such as this one) should not be numbered but should be given a title in bold italic. Capitalize all words except for articles (a, an, the) and prepositions (i.e., of, to, from).
Section Spacing
One line space should be left under a first-level section title, a half line space under a second-level section title and no space under a third-level section title.  One line space should be left above all section titles. 

Paragraphs should be separated by one line space. 
3.	Title Page
This page contains the paper title, brief information about all authors, photos of authors, and an abstract. See the example on pages 1 and 6.
3.1	Title
The paper title should be centered in 12-point Times New Roman bold capital letters like the title of this document.
3.2	Author Information
See the front page for one or two authors, the last page for more than 3 authors.
3.3	Abstract
The abstract should be no more than ten lines. It should be provided in English and French; however the non French speaking authors who could encounter difficulties may contact the conference organizers for help, and in any case the French abstracts will be revised, if needed, by a French speaking member of the Scientific Committee. Keywords should also be provided beneath each abstract, in both languages.
4.	Figures, Tables, and Equations
All figures, tables, and equations should be numbered consecutively by type and referenced within the text, e.g., Figure 1, Table 1, Equation (1).  They should be placed in the paper as near as possible after the point at which they are first mentioned. The words “figure,” “table,” and “equation” may not be abbreviated.
4.1	Figures
Figures include illustrations, photographs, charts, and graphs. All figures should be given captions.  Captions should be centered beneath the figure, and all words (except articles and prepositions) should be capitalized (see example below). Separate captions from body text with one line space. 

Figure 1 – This is a sample figure caption

All writing within figures should, where possible, be in 12-point Times New Roman. Please note that color images will be printed in black and white in the paper pre-proceedings and must remain understandable, and in color in the CD pre- and post-proceedings. 
4.2	Tables
Table captions should be above the table, flush left, and all words (except articles and prepositions) should be capitalized (see example below).  Separate table captions from body text and the table with one line space above and below the captions as below.  

Table 1 - Summary statistics for pre-weighed trucks (COV = Coefficient of Variance)

	Type 1	Type 4	Type 5	
	Gross	Axle	Gross	Axle	Gross	Axle	
Mean IF	1.00	0.98	1.03	1.03	1.02	1.02	
COV (%)	7.21	9.86	6.21	8.44	5.18	7.85	
Within 15%	-----	93	-----	94	-----	85	

Tables should use 1-point lines for the top and bottom, and a half-point line beneath the table’s header.  Thickness of all table lines must be 0.5 point. All writing within tables should, where possible, be in 12-point Times New Roman. 
4.3	Equations and Units
All equations should be indented 1.2 cm from the left margin and numbered in brackets in the extreme right hand side of the page as follows:

	C	=									(2)
5.	Electronic Submission Instructions
Papers must be submitted on line on the conference web site: http://iswim.free.fr/icwim6 
or by email to: iswim@free.fr  (only in case of problems encountered on the web site), as Microsoft Word files or RTF (Rich Text Format) files. Try to keep the whole file size as low as possible, below 2Mbytes if possible. If the file is larger than this, please reduce the resolution of photographs (see Section 5.2).
5.1	Word Files
If you plan to include photographs or other images in your Microsoft Word document, please use the “Insert” menu to place images in your file rather than copying and pasting from another file.  Do not link to the image file.
5.2	Photographs
Photographs should be set at a resolution of 300 dots per inch (dpi). Photographs with lower resolution have much poorer print quality. Use .JPG file with a rate of compression which maintains the file size of each picture below 500 kbytes. Be careful to adjust the final size of each picture in your photo editor, and import them as 1:1 scale in the Word or RTF file (in order to prevent excessively large file size).

The photographs will be published in black and white in the paper proceedings.

A list of references should be given at the end of the paper. In the body of the paper, references should be referred to by author and year. For example: “Jones and Smith (1996) have extended the theory to in-motion systems” or “Kellser’s theory for WIM systems (1995) has shown” or “the theory for pseudo-static systems is well established (Kessler, 1995).” 

The reference list style should be as follows (the first is a book, the second and third are conference papers, and the last is a journal paper):
6.	References
•	Jones, J.M. (1992), Elements of WIM Systems in Operation, E & F-N Spon.
•	O'Brien, E.J. and Sclob, J.M. (1993),  “Prediction of Extreme Load Effects in Highway Bridges”, in Proceedings of the 9th International Conference on Highway Structures, eds. A.M. O'Reilly and J.V. Smith, Warsaw, Poland, 131-143.
•	O'Connor, W.D., Bloggs, J. and Smith, J.J. (1994), “A Proposed Renewable Energy Source”, in Proc. 2nd Int. Congress on Innovation, eds A.B. Jones and Smith, Elsevier Press, 2, 121-130.
•	Freud, S.J., Smith, A.W. and Mannion, A.N. (1992), “A New Approach to Behaviourism”, Journal of Structural Engineering, Am. Soc. Civ. Engnrs, 12, 1463-1479.

 FRONT PAGE FOR 3 AND 4 AUTHORS

A. AUTHOR1
Organization 1
Place 1	B. AUTHOR2
Organization 2
Place 2	C. AUTHOR3
Organization 3
Place 3	D. AUTHOR4
Organization 4
Place 4	

Abstract
This paper gives instructions for the preparation of papers to be presented at the 6th International Conference on Weigh-In-Motion (ICWIM6). It is presented, as far as is possible, in a style consistent with a conference paper. Abstracts for these papers should not exceed 10 lines in length. The abstract should be provided in English and French. Nothing except the author details, photographs and abstracts should be present on the first page.
The papers will be first published in the conference proceedings, later on the ISWIM website, and the best ones may be submitted to a Journal with the authors’ agreement.
Keywords:  Language, Font, Photograph, Heavy Vehicles, Freight transport, Weigh-in-Motion, WIM.

Résumé
Ce papier donne les instructions pour la préparation des articles qui seront présentés à la 6e conférence internationale sur le pesage en marche (ICWIM6). Ces instructions sont aussi proches que possible de celles de la plupart des articles de conférences. Les résumés de ces articles ne doivent pas dépasser 10 lignes. Le résumé doit être produit en anglais et français. Rien d’autre que les informations concernant les auteurs, leurs photos et le résumé ne doit figurer sur la première page.
Les articles seront d’abord publiés dans les actes de la conférence, puis sur le site ISWIM. Les meilleurs pourront être soumis à une revue avec l’accord des auteurs.
Mots-clés: Langue, police, photos, poids lourds, transport de marchandises, pesage en marche, WIM.